NEC Phone/ Phone System

-
1800 444 44 44: Once you dial it, it says your phone line number.

 Steps To Adjusting The Ring Volume On The Telephone:
  • While phone is ringing, press the up or down arrows on toggle pad to adjust ring volume.
  • To make phone ring, dial “729” and press the up or down arrows on toggle pad to adjust ring volume.
  • Press speaker button to hang up and ring volume will be set.
To Print out NEC Telephone Label Printing: 

  • Go desi.com
  • Download the software (http://labels.desi.com/info-exec/display/downloads)
  • Install the software.
  • Choose your phone model number.
  • Start to make labels.

Comments

Post a Comment

Popular posts from this blog

MCAS ProctorCache Setup

-
Image
I would like to share my experience with MCAS proctorcache computer. If you need to setup second precaching computer;  You need to add a precaching computer after choose your school on MCAS PAN website. (Setup>TestNav Configurations>Search(Show All Results) >Choose your school>Select Task(Create/Edit TestNav Configurations)>Press Start button. To precache of the test; Login PAN website! Navigate Testing>Session>Search(Show all results)> Choose your test> See picture below> and the new page. Click on the Precache. The protoctorcache computer's firewall's port 4480 and 4481 should be opened! If you couldn't open those ports, just turn off the precaching computer's firewall. How to open a port on a computer?  http://www.myiteducation.org/2018/03/general-computer-tips.html Don't forget to change the proctor cache sleeping time  to never. The proctor cache password is  t35t1n6 =====================================
Read more

My CCNA Useful Links

-
Summary of All Topics-1 Click on the "Sections (Theory)" part. Summary of All Topics-2 Summary of All Topics-3 Cisco Networking All-in-One Cheat Sheet GENERAL INFO&TERMS IPv4 IPv6 ROUTING OSPF Explanation Video OSPF Lab - 1 OSPF Lab - 2 EIGRP Explanation Video EIGRP Lab - 1 EIGRP Lab - 2 Troubleshooting: Check AS, networks must be configured under eigrp (check the interface ip to see there is any missing network), metric values must be same. Static and Default Route Lab HSRP Vs VRRP Vs GLBP Redundancy Protocols How to Break Cisco Routers Password Using Rommon Mode Don't forget to go rommon mode back and start your router with default register value which is 0x2102. This part is not in the video. SWITCHING STP VTP STACKABLE SWITCH ETHERCHANNEL VLAN HOW TO CONFIGURE ROUTER ON A STICK - 802.1Q TRUNK TO CISCO ROUTER How to Confi gure Port Security on a Cisco Switch   OTHER ACL Router1(config)#access-list 101
Read more